ecqm.measure

CMS130v7 - Colorectal Cancer Screening

Rationale:

Colorectal Cancer Screening. Colorectal cancer represents 8 percent of all new cancer cases and is the second leading cause of cancer deaths in the United States. In 2017, there were an estimated 135,430 new cases of colorectal cancer and an estimated 50,260 deaths attributed to it. According to the National Cancer Institute, about 4.3 percent of men and women will be diagnosed with colorectal cancer at some point during their lifetimes. For most adults, older age is the most important risk factor for colorectal cancer, although being male and black are also associated with higher incidence and mortality. Colorectal cancer is most frequently diagnosed among people 65 to 74 years old (Howlader et al. 2017). Screening can be effective for finding precancerous lesions (polyps) that could later become malignant, and for detecting early cancers that can be more easily and effectively treated. Precancerous polyps usually take about 10 to 15 years to develop into colorectal cancer, and most can be found and removed before turning into cancer. The five-year relative survival rate for people whose colorectal cancer is found in the early stage before it has spread is about 90 percent (American Cancer Society 2017).

Data Elements

MalignantNeoplasmOfColonDiagnosis

Clinical Focus: This value set contains codes to identify malignant neoplasms of the colon.

Data Element Scope: This value set was intended to identify patients who had malignant neoplasms of the colon.

Inclusion Criteria: Includes codes that indicate malignant neoplasms of the colon, rectum and anus.

Exclusion Criteria: None.

ResultValue constrained to codes in the Malignant Neoplasm of Colon valueset (2.16.840.1.113883.3.464.1003.108.12.1001)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

MalignantNeoplasmOfColonDiagnosis

0..*

EncounterInpatientPerformed

Clinical Focus: This set of values identify the most common inpatient encounter types.

Data Element Scope: The intent of this data element is to identify patients who have had an inpatient encounter. Using the Quality Data Model, this particular element will map to the 'encounter' category.

Inclusion Criteria: Only SNOMED CT codes representing inpatient encounter should be included.

Exclusion Criteria: None.

Subject constrained to the Encounter Inpatient

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

EncounterInpatientPerformed

0..*

OfficeVisit1Performed

Clinical Focus: This value set identifies patients who have had an office or other outpatient visit.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Includes comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity.

Exclusion Criteria: Excludes non-office visits, including telehealth services.

Subject constrained to the Office Visit1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

OfficeVisit1Performed

0..*

HomeHealthcareServicesPerformed

Clinical Focus: This value set identifies patients who have had a home health visit by a provider for the evaluation or management of a new or existing patient.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Include all home visits for the evaluation and management of a new or established patient.

Exclusion Criteria: None

Subject constrained to the Home Healthcare Services

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

HomeHealthcareServicesPerformed

0..*

PreventiveCareServicesInitialOfficeVisit18AndUp1Performed

Clinical Focus: This value set identifies patients over the age of 18 who have had an initial preventive care office visit.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Includes comprehensive preventive medicine reevaluation and management of an individual over the age of 18.

Exclusion Criteria: Excludes non-office visits, including telehealth services.

Subject constrained to the Preventive Care Services-Initial Office Visit, 18 and Up1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

PreventiveCareServicesInitialOfficeVisit18AndUp1Performed

0..*

PreventiveCareServicesEstablishedOfficeVisit18AndUp1Performed

Clinical Focus: This value set identifies patients over the age of 18 who have had an established preventive care office visit.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Includes comprehensive preventive medicine reevaluation and management of an individual over the age of 18.

Exclusion Criteria: Excludes non-office visits, including telehealth services.

Subject constrained to the Preventive Care Services - Established Office Visit, 18 and Up1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

PreventiveCareServicesEstablishedOfficeVisit18AndUp1Performed

0..*

AnnualWellnessVisit1Performed

Clinical Focus: This value set contains concepts related to annual wellness visits.

Data Element Scope: The intent of this data element is to identify patients who have had an annual wellness visit. Using the Quality Data Model, this particular data element would be classified under the 'Encounter' category.

Inclusion Criteria: Includes encounters specific to annual wellness visits.

Exclusion Criteria: None

Subject constrained to the Annual Wellness Visit1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

AnnualWellnessVisit1Performed

0..*

HospiceCareAmbulatoryOrder

Clinical Focus: Patients receiving hospice care outside of hospital or long term care facility.

Data Element Scope: The intent of this value set is to identify all patients receiving hospice care outside of hospital or long term care facility . Using the quality data model this maps to 'Intervention, Order' and 'Procedure, Order'.

Inclusion Criteria: All hospice care concepts should be included.

Exclusion Criteria: Do not include concepts for palliative care or comfort measures.

Subject constrained to the Hospice care ambulatory

InterventionOrder: Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime

DataType

Cardinality

HospiceCareAmbulatoryOrder

0..*

HospiceCareAmbulatoryPerformed

Clinical Focus: Patients receiving hospice care outside of hospital or long term care facility.

Data Element Scope: The intent of this value set is to identify all patients receiving hospice care outside of hospital or long term care facility . Using the quality data model this maps to 'Intervention, Order' and 'Procedure, Order'.

Inclusion Criteria: All hospice care concepts should be included.

Exclusion Criteria: Do not include concepts for palliative care or comfort measures.

Subject constrained to the Hospice care ambulatory

InterventionPerformed: Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: startTime – The time the intervention begins stopTime – The time the intervention ends NOTE - timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.

DataType

Cardinality

HospiceCareAmbulatoryPerformed

0..*

FitDnaPerformed

Clinical Focus: This value set contains codes to identify a FIT DNA test.

Data Element Scope: This value set was intended to identify patients who had a FIT DNA test.

Inclusion Criteria: Includes codes that indicate noninvasive colorectal cancer DNA and occult blood screening in stool.

Exclusion Criteria: Exclude order only codes.

Subject constrained to the FIT DNA

LaboratoryTestPerformed: Data elements that meet criteria using this datatype should document the laboratory test indicated by the QDM category and its corresponding value set was performed. Timing: The Relevant Period addresses: startTime – When the laboratory test is initiated (i.e., the time the specimen collection begins). stopTime – when the laboratory test is completed (i.e., the time the specimen collection ends). Examples: 1) Initiation of a venipuncture for a fasting blood glucose to the time venipuncture for the fasting blood glucose is completed – basically a single point in time for many specimen collections. 2) Initiation of a 24-hour urine collection for measured creatinine clearance until completion of the 24-hour urine collection Note – the time that the result report is available is a separate attribute than the time of the study (specimen collection)

DataType

Cardinality

FitDnaPerformed

0..*

FecalOccultBloodTestFobtPerformed

Clinical Focus: This value set contains codes to identify a fecal occult blood test.

Data Element Scope: This value set was intended to identify patients who had a fecal occult blood test.

Inclusion Criteria: Includes codes that tests for occult blood in stool.

Exclusion Criteria: Exclude tests for occult blood in other parts of the body. Exclude order only codes and code that indicate narrative reports.

Subject constrained to the Fecal Occult Blood Test (FOBT)

LaboratoryTestPerformed: Data elements that meet criteria using this datatype should document the laboratory test indicated by the QDM category and its corresponding value set was performed. Timing: The Relevant Period addresses: startTime – When the laboratory test is initiated (i.e., the time the specimen collection begins). stopTime – when the laboratory test is completed (i.e., the time the specimen collection ends). Examples: 1) Initiation of a venipuncture for a fasting blood glucose to the time venipuncture for the fasting blood glucose is completed – basically a single point in time for many specimen collections. 2) Initiation of a 24-hour urine collection for measured creatinine clearance until completion of the 24-hour urine collection Note – the time that the result report is available is a separate attribute than the time of the study (specimen collection)

DataType

Cardinality

FecalOccultBloodTestFobtPerformed

0..*

EthnicityPatientCharacteristicEthnicity

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Ethnicity valueset (2.16.840.1.114222.4.11.837)

PatientCharacteristicEthnicity: Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set. Timing: Ethnicity does not have a specific timing. Measures using Patient Characteristic, Ethnicity should address the most recent entry in the clinical record.

DataType

Cardinality

EthnicityPatientCharacteristicEthnicity

0..*

OncAdministrativeSexPatientCharacteristicGender

Clinical Focus: Gender identity restricted to only Male and Female used in administrative situations requiring a restriction to these two categories.

Data Element Scope: Gender

Inclusion Criteria: Male and Female only.

Exclusion Criteria: Any gender identity that is not male or female.

ResultValue constrained to codes in the ONC Administrative Sex valueset (2.16.840.1.113762.1.4.1)

PatientCharacteristicGender: Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set. Timing: Birth (administrative) sex does not have a specific timing.

DataType

Cardinality

OncAdministrativeSexPatientCharacteristicGender

0..*

PayerPatientCharacteristicPayer

Clinical Focus: Categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system

Data Element Scope: @code in CCDA r2.1 template Planned Coverage [act: identifier urn:oid:2.16.840.1.113883.10.20.22.4.129 (open)] DYNAMIC

Inclusion Criteria: All codes in the code system

Exclusion Criteria: none

ResultValue constrained to codes in the Payer valueset (2.16.840.1.114222.4.11.3591)

PatientCharacteristicPayer: Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: startTime – The first day of insurance coverage with the referenced payer stopTime – The last day of insurance coverage with the referenced payer

DataType

Cardinality

PayerPatientCharacteristicPayer

0..*

RacePatientCharacteristicRace

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Race valueset (2.16.840.1.114222.4.11.836)

PatientCharacteristicRace: Data elements that meet criteria using this datatype should document the patient’s race. Timing: Race does not have a specific timing. Measures using Patient Characteristic, Race should address the most recent entry in the clinical record.

DataType

Cardinality

RacePatientCharacteristicRace

0..*

ColonoscopyPerformed

Clinical Focus: This value set contains codes to identify a colonoscopy.

Data Element Scope: This value set was intended to identify patients who had a colonoscopy.

Inclusion Criteria: Includes codes that indicate a colonoscopy.

Exclusion Criteria: None.

Subject constrained to the Colonoscopy

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

ColonoscopyPerformed

0..*

CtColonographyPerformed

Clinical Focus: This value set contains codes to identify a computed tomography colongraphy.

Data Element Scope: This value set was intended to identify patients who had a computed tomography colonography.

Inclusion Criteria: Includes codes that indicate a computed tomography colonography.

Exclusion Criteria: None.

Subject constrained to the CT Colonography

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

CtColonographyPerformed

0..*

FlexibleSigmoidoscopyPerformed

Clinical Focus: This value set contains codes to identify a flexible sigmoidoscopy.

Data Element Scope: This value set was intended to identify patients who had a flexible sigmoidoscopy.

Inclusion Criteria: Includes codes that indicate a flexible sigmoidoscopy.

Exclusion Criteria: Exclude order only codes and code that indicate narrative reports.

Subject constrained to the Flexible Sigmoidoscopy

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

FlexibleSigmoidoscopyPerformed

0..*

TotalColectomyPerformed

Clinical Focus: This value set contains codes to identify a total colectomy.

Data Element Scope: This value set was intended to identify patients who had a total colectomy.

Inclusion Criteria: Includes codes that indicate a total colectomy, as an open or laparoscopic procedure.

Exclusion Criteria: Excludes partial colectomies.

Subject constrained to the Total Colectomy

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

TotalColectomyPerformed

0..*