ecqm.measure

CMS153v7 - Chlamydia Screening for Women

Rationale:

Chlamydia Screening for Women. Chlamydia trachomatis is the most common sexually transmitted bacterial infection in the U.S., resulting in roughly 1.6 million cases each year (CDC 2017). Chlamydia infections are often asymptomatic, but, if left untreated, can lead to serious and irreversible complications (USPSTF 2014, CDC 2017). Women are particularly vulnerable when infected with chlamydia. Left untreated, chlamydia can cause pelvic inflammatory disease (PID), which can lead to chronic pelvic pain or infertility. Pregnant women may also transmit the infection to their infant, potentially resulting in neonatal pneumonia (CDC 2017).

Data Elements

SexuallyActivePerformed

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Sexually Active

AssessmentPerformed: Data elements that meet criteria using this datatype should document completion of the assessment indicated by the QDM category and its corresponding value set. Timing: The time the assessment is completed; Author dateTime.

DataType

Cardinality

SexuallyActivePerformed

0..*

GenitalHerpesDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Genital Herpes valueset (2.16.840.1.113883.3.464.1003.110.12.1049)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

GenitalHerpesDiagnosis

0..*

OtherFemaleReproductiveConditionsDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Other Female Reproductive Conditions valueset (2.16.840.1.113883.3.464.1003.111.12.1006)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

OtherFemaleReproductiveConditionsDiagnosis

0..*

ComplicationsOfPregnancyChildbirthAndThePuerperiumDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Complications of Pregnancy, Childbirth and the Puerperium valueset (2.16.840.1.113883.3.464.1003.111.12.1012)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

ComplicationsOfPregnancyChildbirthAndThePuerperiumDiagnosis

0..*

CarrierOfPredominantlySexuallyTransmittedInfectionDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Carrier of Predominantly Sexually Transmitted Infection valueset (2.16.840.1.113883.3.464.1003.112.11.1023)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

CarrierOfPredominantlySexuallyTransmittedInfectionDiagnosis

0..*

GonococcalInfectionsAndVenerealDiseasesDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Gonococcal Infections and Venereal Diseases valueset (2.16.840.1.113883.3.464.1003.112.12.1001)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

GonococcalInfectionsAndVenerealDiseasesDiagnosis

0..*

SyphilisDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Syphilis valueset (2.16.840.1.113883.3.464.1003.112.12.1002)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

SyphilisDiagnosis

0..*

ChlamydiaDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Chlamydia valueset (2.16.840.1.113883.3.464.1003.112.12.1003)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

ChlamydiaDiagnosis

0..*

InflammatoryDiseasesOfFemaleReproductiveOrgansDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Inflammatory Diseases of Female Reproductive Organs valueset (2.16.840.1.113883.3.464.1003.112.12.1004)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

InflammatoryDiseasesOfFemaleReproductiveOrgansDiagnosis

0..*

HivDiagnosis

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the HIV valueset (2.16.840.1.113883.3.464.1003.120.12.1003)

Diagnosis: Condition/Diagnosis/Problem represents a practitioner’s identification of a patient’s disease, illness, injury, or condition. This category contains a single datatype to represent all of these concepts: Diagnosis. A practitioner determines the diagnosis by means of examination, diagnostic test results, patient history, and/or family history. Diagnoses are usually considered unfavorable, but may also represent neutral or favorable conditions that affect a patient’s plan of care (e.g., pregnancy). The QDM does not prescribe the source of diagnosis data in the EHR. Diagnoses may be found in a patient’s problem list, encounter diagnosis list, claims data, or other sources within the EHR. The preferred terminology for diagnoses is SNOMED-CT, but diagnoses may also be encoded using ICD-9/10. The Diagnosis datatype should not be used for differential diagnoses or rule-out diagnoses (neither of which are currently supported by the QDM).

DataType

Cardinality

HivDiagnosis

0..*

DiagnosticStudiesDuringPregnancyOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Diagnostic Studies During Pregnancy

DiagnosticStudyOrder: Data elements that meet criteria using this datatype should document a request by a clinician or appropriately licensed care provider to an appropriate provider or organization to perform the diagnostic study indicated by the QDM category and its corresponding value set. The request may be in the form of a consultation or a direct order to the organization that performs the diagnostic study. Diagnostic studies are those that are not performed in the clinical laboratory. Such studies include but are not limited to imaging studies, cardiology studies (electrocardiogram, treadmill stress testing), pulmonary function testing, vascular laboratory testing, and others. Timing: The time the order is signed; Author dateTime.

DataType

Cardinality

DiagnosticStudiesDuringPregnancyOrder

0..*

XRayStudyAllInclusiveOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the X-Ray Study (all inclusive)

DiagnosticStudyOrder: Data elements that meet criteria using this datatype should document a request by a clinician or appropriately licensed care provider to an appropriate provider or organization to perform the diagnostic study indicated by the QDM category and its corresponding value set. The request may be in the form of a consultation or a direct order to the organization that performs the diagnostic study. Diagnostic studies are those that are not performed in the clinical laboratory. Such studies include but are not limited to imaging studies, cardiology studies (electrocardiogram, treadmill stress testing), pulmonary function testing, vascular laboratory testing, and others. Timing: The time the order is signed; Author dateTime.

DataType

Cardinality

XRayStudyAllInclusiveOrder

0..*

EncounterInpatientPerformed

Clinical Focus: This set of values identify the most common inpatient encounter types.

Data Element Scope: The intent of this data element is to identify patients who have had an inpatient encounter. Using the Quality Data Model, this particular element will map to the 'encounter' category.

Inclusion Criteria: Only SNOMED CT codes representing inpatient encounter should be included.

Exclusion Criteria: None.

Subject constrained to the Encounter Inpatient

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

EncounterInpatientPerformed

0..*

OfficeVisit1Performed

Clinical Focus: This value set identifies patients who have had an office or other outpatient visit.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Includes comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity.

Exclusion Criteria: Excludes non-office visits, including telehealth services.

Subject constrained to the Office Visit1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

OfficeVisit1Performed

0..*

HomeHealthcareServicesPerformed

Clinical Focus: This value set identifies patients who have had a home health visit by a provider for the evaluation or management of a new or existing patient.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Include all home visits for the evaluation and management of a new or established patient.

Exclusion Criteria: None

Subject constrained to the Home Healthcare Services

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

HomeHealthcareServicesPerformed

0..*

PreventiveCareServicesInitialOfficeVisit0To17Performed

Clinical Focus: Initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, for a patient that has no prior outpatient professional services from the physician practice in the last 3 years.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Include only codes that indicate initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, for a patient that has no prior outpatient professional services from the physician practice in the last 3 years.

Exclusion Criteria: Exclude codes that are not for comprehensive preventive medical evaluations and codes that are for patients who have been seen in the last 3 years.

Subject constrained to the Preventive Care Services, Initial Office Visit, 0 to 17

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

PreventiveCareServicesInitialOfficeVisit0To17Performed

0..*

PreventiveCareServicesInitialOfficeVisit18AndUp1Performed

Clinical Focus: This value set identifies patients over the age of 18 who have had an initial preventive care office visit.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Includes comprehensive preventive medicine reevaluation and management of an individual over the age of 18.

Exclusion Criteria: Excludes non-office visits, including telehealth services.

Subject constrained to the Preventive Care Services-Initial Office Visit, 18 and Up1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

PreventiveCareServicesInitialOfficeVisit18AndUp1Performed

0..*

PreventiveCareEstablishedOfficeVisit0To17Performed

Clinical Focus: Initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, for a patient that received prior outpatient professional services from the physician practice in the last 3 years.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Include only codes that indicate initial comprehensive preventive medical evaluation, including regular preventive care or care of small problem or preexisting condition that requires no extra work, for a patient that received prior outpatient professional services from the physician practice in the last 3 years.

Exclusion Criteria: Exclude codes that are not for comprehensive preventive medical evaluations and codes that are for patients who have not been seen in the last 3 years.

Subject constrained to the Preventive Care, Established Office Visit, 0 to 17

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

PreventiveCareEstablishedOfficeVisit0To17Performed

0..*

PreventiveCareServicesEstablishedOfficeVisit18AndUp1Performed

Clinical Focus: This value set identifies patients over the age of 18 who have had an established preventive care office visit.

Data Element Scope: This value set was intended to map to the QDM data type of encounter.

Inclusion Criteria: Includes comprehensive preventive medicine reevaluation and management of an individual over the age of 18.

Exclusion Criteria: Excludes non-office visits, including telehealth services.

Subject constrained to the Preventive Care Services - Established Office Visit, 18 and Up1

EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location

DataType

Cardinality

PreventiveCareServicesEstablishedOfficeVisit18AndUp1Performed

0..*

HospiceCareAmbulatoryOrder

Clinical Focus: Patients receiving hospice care outside of hospital or long term care facility.

Data Element Scope: The intent of this value set is to identify all patients receiving hospice care outside of hospital or long term care facility . Using the quality data model this maps to 'Intervention, Order' and 'Procedure, Order'.

Inclusion Criteria: All hospice care concepts should be included.

Exclusion Criteria: Do not include concepts for palliative care or comfort measures.

Subject constrained to the Hospice care ambulatory

InterventionOrder: Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime

DataType

Cardinality

HospiceCareAmbulatoryOrder

0..*

HospiceCareAmbulatoryPerformed

Clinical Focus: Patients receiving hospice care outside of hospital or long term care facility.

Data Element Scope: The intent of this value set is to identify all patients receiving hospice care outside of hospital or long term care facility . Using the quality data model this maps to 'Intervention, Order' and 'Procedure, Order'.

Inclusion Criteria: All hospice care concepts should be included.

Exclusion Criteria: Do not include concepts for palliative care or comfort measures.

Subject constrained to the Hospice care ambulatory

InterventionPerformed: Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: startTime – The time the intervention begins stopTime – The time the intervention ends NOTE - timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.

DataType

Cardinality

HospiceCareAmbulatoryPerformed

0..*

PapTestOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Pap Test

LaboratoryTestOrder: Data elements that meet criteria using this datatype should document a request for the laboratory test indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime.

DataType

Cardinality

PapTestOrder

0..*

LabTestsForSexuallyTransmittedInfectionsOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Lab Tests for Sexually Transmitted Infections

LaboratoryTestOrder: Data elements that meet criteria using this datatype should document a request for the laboratory test indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime.

DataType

Cardinality

LabTestsForSexuallyTransmittedInfectionsOrder

0..*

LabTestsDuringPregnancyOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Lab Tests During Pregnancy

LaboratoryTestOrder: Data elements that meet criteria using this datatype should document a request for the laboratory test indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime.

DataType

Cardinality

LabTestsDuringPregnancyOrder

0..*

PregnancyTestOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Pregnancy Test

LaboratoryTestOrder: Data elements that meet criteria using this datatype should document a request for the laboratory test indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime.

DataType

Cardinality

PregnancyTestOrder

0..*

ChlamydiaScreeningPerformed

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlamydia Screening

LaboratoryTestPerformed: Data elements that meet criteria using this datatype should document the laboratory test indicated by the QDM category and its corresponding value set was performed. Timing: The Relevant Period addresses: startTime – When the laboratory test is initiated (i.e., the time the specimen collection begins). stopTime – when the laboratory test is completed (i.e., the time the specimen collection ends). Examples: 1) Initiation of a venipuncture for a fasting blood glucose to the time venipuncture for the fasting blood glucose is completed – basically a single point in time for many specimen collections. 2) Initiation of a 24-hour urine collection for measured creatinine clearance until completion of the 24-hour urine collection Note – the time that the result report is available is a separate attribute than the time of the study (specimen collection)

DataType

Cardinality

ChlamydiaScreeningPerformed

0..*

ContraceptiveMedicationsActive

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Contraceptive Medications

MedicationActive: Data elements that meet criteria using this datatype should document that the medication indicated by the QDM category and its corresponding value set is being taken by the patient. Keep in mind that when this datatype is used with timing relationships, the criterion is looking for a medication being taken for the time frame indicated by the timing relationships. Timing: The Relevant Period addresses: StartTime = when the medication is first known to be used (generally the time of entry on the medication list); StopTime = when the medication is discontinued (generally, the time discontinuation is recorded on the medication list)

DataType

Cardinality

ContraceptiveMedicationsActive

0..*

ContraceptiveMedicationsOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Contraceptive Medications

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ContraceptiveMedicationsOrder

0..*

IsotretinoinOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Isotretinoin

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

IsotretinoinOrder

0..*

EthnicityPatientCharacteristicEthnicity

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Ethnicity valueset (2.16.840.1.114222.4.11.837)

PatientCharacteristicEthnicity: Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set. Timing: Ethnicity does not have a specific timing. Measures using Patient Characteristic, Ethnicity should address the most recent entry in the clinical record.

DataType

Cardinality

EthnicityPatientCharacteristicEthnicity

0..*

OncAdministrativeSexPatientCharacteristicGender

Clinical Focus: Gender identity restricted to only Male and Female used in administrative situations requiring a restriction to these two categories.

Data Element Scope: Gender

Inclusion Criteria: Male and Female only.

Exclusion Criteria: Any gender identity that is not male or female.

ResultValue constrained to codes in the ONC Administrative Sex valueset (2.16.840.1.113762.1.4.1)

PatientCharacteristicGender: Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set. Timing: Birth (administrative) sex does not have a specific timing.

DataType

Cardinality

OncAdministrativeSexPatientCharacteristicGender

0..*

FemalePatientCharacteristicGender

Clinical Focus: Concepts that represent Female when assessing quality measures

Data Element Scope: Gender

Inclusion Criteria: Appropriate female gender concepts

Exclusion Criteria: Concepts representing Male gender

ResultValue constrained to codes in the Female valueset (2.16.840.1.113883.3.560.100.2)

PatientCharacteristicGender: Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set. Timing: Birth (administrative) sex does not have a specific timing.

DataType

Cardinality

FemalePatientCharacteristicGender

0..*

PayerPatientCharacteristicPayer

Clinical Focus: Categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system

Data Element Scope: @code in CCDA r2.1 template Planned Coverage [act: identifier urn:oid:2.16.840.1.113883.10.20.22.4.129 (open)] DYNAMIC

Inclusion Criteria: All codes in the code system

Exclusion Criteria: none

ResultValue constrained to codes in the Payer valueset (2.16.840.1.114222.4.11.3591)

PatientCharacteristicPayer: Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: startTime – The first day of insurance coverage with the referenced payer stopTime – The last day of insurance coverage with the referenced payer

DataType

Cardinality

PayerPatientCharacteristicPayer

0..*

RacePatientCharacteristicRace

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

ResultValue constrained to codes in the Race valueset (2.16.840.1.114222.4.11.836)

PatientCharacteristicRace: Data elements that meet criteria using this datatype should document the patient’s race. Timing: Race does not have a specific timing. Measures using Patient Characteristic, Race should address the most recent entry in the clinical record.

DataType

Cardinality

RacePatientCharacteristicRace

0..*

ProceduresDuringPregnancyPerformed

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Procedures During Pregnancy

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

ProceduresDuringPregnancyPerformed

0..*

ProceduresInvolvingContraceptiveDevicesPerformed

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Procedures Involving Contraceptive Devices

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

ProceduresInvolvingContraceptiveDevicesPerformed

0..*

DeliveryLiveBirthsPerformed

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Delivery Live Births

ProcedurePerformed: Data elements that meet criteria using this datatype should document the completion of the procedure indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: StartTime = the time the procedure begins; StopTime = the time the procedure is completed NOTE: 1) Timing refers to a single instance of a procedure. If a measure seeks to evaluate multiple procedures over a period of time, the measure developer should use CQL logic to represent the query request. 2) The Incision dateTime is a single point in time available from the Operating Room and/or Anesthesia Record.

DataType

Cardinality

DeliveryLiveBirthsPerformed

0..*