CMS156v7 (DER Reference Model)

Rationale:: Use of High-Risk Medications in the Elderly. Older adults receiving inappropriate medications are more likely to report poorer health status at follow-up, compared to those who receive appropriate medications (Fu, Liu, and Christensen 2004). A study of the prevalence of potentially inappropriate medication use in older adults found that 40 percent of individuals 65 and older filled at least one prescription for a potentially inappropriate medication and 13 percent filled two or more (Fick et al. 2008). While some adverse drug events are not preventable, studies estimate that between 30 and 80 percent of adverse drug events in the elderly are preventable (MacKinnon and Hepler 2003). Reducing the number of inappropriate prescriptions can lead to improved patient safety and significant cost savings. Conservative estimates of extra costs due to potentially inappropriate medications in the elderly average $7.2 billion a year (Fu et al. 2007). Medication use by older adults will likely increase further as the U.S. population ages, new drugs are developed, and new therapeutic and preventive uses for medications are discovered (Rothberg et al. 2008). The annual direct costs of preventable adverse drug events (ADEs) in the Medicare population have been estimated to exceed $800 million (IOM, 2007). By the year 2030, nearly one in five U.S. residents is expected to be aged 65 years or older; this age group is projected to more than double in number from 38.7 million in 2008 to more than 88.5 million in 2050. Likewise, the population aged 85 years or older is expected to increase almost four-fold, from 5.4 million to 19 million between 2008 and 2050. As the elderly population continues to grow, the number of older adults who present with multiple medical conditions for which several medications are prescribed continues to increase, resulting in polypharmacy (Gray and Gardner 2009).

- Data Elements
  
  EncounterInpatientPerformed
  
  Clinical Focus: This set of values identify the most common inpatient encounter types.
  
  Data Element Scope: The intent of this data element is to identify patients who have had an inpatient encounter. Using the Quality Data Model, this particular element will map to the 'encounter' category.
  
  Inclusion Criteria: Only SNOMED CT codes representing inpatient encounter should be included.
  
  Exclusion Criteria: None.
  
  Subject constrained to the Encounter Inpatient
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  EncounterInpatientPerformed
  
  0..*
  
  OphthalmologicOutpatientVisitPerformed
  
  Clinical Focus: Under Development
  
  Data Element Scope: Under Development
  
  Inclusion Criteria: Under Development
  
  Exclusion Criteria: Under Development
  
  Subject constrained to the Ophthalmologic Outpatient Visit
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  OphthalmologicOutpatientVisitPerformed
  
  0..*
  
  OfficeVisit1Performed
  
  Clinical Focus: This value set identifies patients who have had an office or other outpatient visit.
  
  Data Element Scope: This value set was intended to map to the QDM data type of encounter.
  
  Inclusion Criteria: Includes comprehensive history, evaluation, and management of a patient in an office or outpatient facility. Patient can be presenting with problems that are minor to high severity.
  
  Exclusion Criteria: Excludes non-office visits, including telehealth services.
  
  Subject constrained to the Office Visit1
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  OfficeVisit1Performed
  
  0..*
  
  NursingFacilityVisitPerformed
  
  Clinical Focus: Under Development
  
  Data Element Scope: Under Development
  
  Inclusion Criteria: Under Development
  
  Exclusion Criteria: Under Development
  
  Subject constrained to the Nursing Facility Visit
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  NursingFacilityVisitPerformed
  
  0..*
  
  DischargeServicesNursingFacilityPerformed
  
  Clinical Focus: Under Development
  
  Data Element Scope: Under Development
  
  Inclusion Criteria: Under Development
  
  Exclusion Criteria: Under Development
  
  Subject constrained to the Discharge Services - Nursing Facility
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  DischargeServicesNursingFacilityPerformed
  
  0..*
  
  CareServicesInLongTermResidentialFacilityPerformed
  
  Clinical Focus: Under Development
  
  Data Element Scope: Under Development
  
  Inclusion Criteria: Under Development
  
  Exclusion Criteria: Under Development
  
  Subject constrained to the Care Services in Long-Term Residential Facility
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  CareServicesInLongTermResidentialFacilityPerformed
  
  0..*
  
  HomeHealthcareServicesPerformed
  
  Clinical Focus: This value set identifies patients who have had a home health visit by a provider for the evaluation or management of a new or existing patient.
  
  Data Element Scope: This value set was intended to map to the QDM data type of encounter.
  
  Inclusion Criteria: Include all home visits for the evaluation and management of a new or established patient.
  
  Exclusion Criteria: None
  
  Subject constrained to the Home Healthcare Services
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  HomeHealthcareServicesPerformed
  
  0..*
  
  PreventiveCareServicesInitialOfficeVisit18AndUp1Performed
  
  Clinical Focus: This value set identifies patients over the age of 18 who have had an initial preventive care office visit.
  
  Data Element Scope: This value set was intended to map to the QDM data type of encounter.
  
  Inclusion Criteria: Includes comprehensive preventive medicine reevaluation and management of an individual over the age of 18.
  
  Exclusion Criteria: Excludes non-office visits, including telehealth services.
  
  Subject constrained to the Preventive Care Services-Initial Office Visit, 18 and Up1
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  PreventiveCareServicesInitialOfficeVisit18AndUp1Performed
  
  0..*
  
  PreventiveCareServicesEstablishedOfficeVisit18AndUp1Performed
  
  Clinical Focus: This value set identifies patients over the age of 18 who have had an established preventive care office visit.
  
  Data Element Scope: This value set was intended to map to the QDM data type of encounter.
  
  Inclusion Criteria: Includes comprehensive preventive medicine reevaluation and management of an individual over the age of 18.
  
  Exclusion Criteria: Excludes non-office visits, including telehealth services.
  
  Subject constrained to the Preventive Care Services - Established Office Visit, 18 and Up1
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  PreventiveCareServicesEstablishedOfficeVisit18AndUp1Performed
  
  0..*
  
  AnnualWellnessVisit1Performed
  
  Clinical Focus: This value set contains concepts related to annual wellness visits.
  
  Data Element Scope: The intent of this data element is to identify patients who have had an annual wellness visit. Using the Quality Data Model, this particular data element would be classified under the 'Encounter' category.
  
  Inclusion Criteria: Includes encounters specific to annual wellness visits.
  
  Exclusion Criteria: None
  
  Subject constrained to the Annual Wellness Visit1
  
  EncounterPerformed: Data elements that meet criteria using this datatype should document that the encounter indicated by the QDM category and its corresponding value set is in progress or has been completed. Timing: The Relevant Period addresses: startTime – The time the encounter began (admission time) stopTime – The time the encounter ended (discharge time). The Author dateTime addresses when an Encounter is documented. Documentation can occur at the beginning, during, at the end or subsequent to the end of an Encounter. The Author dateTime should be used only if the Relevant Period cannot be obtained. The Location Period is an attribute of the attribute facility location addresses: startTime = the time the patient arrived at the location; stopTime = the time the patient departed from the location
  
  DataType
  
  Cardinality
  
  AnnualWellnessVisit1Performed
  
  0..*
  
  HospiceCareAmbulatoryOrder
  
  Clinical Focus: Patients receiving hospice care outside of hospital or long term care facility.
  
  Data Element Scope: The intent of this value set is to identify all patients receiving hospice care outside of hospital or long term care facility . Using the quality data model this maps to 'Intervention, Order' and 'Procedure, Order'.
  
  Inclusion Criteria: All hospice care concepts should be included.
  
  Exclusion Criteria: Do not include concepts for palliative care or comfort measures.
  
  Subject constrained to the Hospice care ambulatory
  
  InterventionOrder: Data elements that meet criteria using this datatype should document a request to perform the intervention indicated by the QDM category and its corresponding value set. Timing: The time the order is signed; Author dateTime
  
  DataType
  
  Cardinality
  
  HospiceCareAmbulatoryOrder
  
  0..*
  
  HospiceCareAmbulatoryPerformed
  
  Clinical Focus: Patients receiving hospice care outside of hospital or long term care facility.
  
  Data Element Scope: The intent of this value set is to identify all patients receiving hospice care outside of hospital or long term care facility . Using the quality data model this maps to 'Intervention, Order' and 'Procedure, Order'.
  
  Inclusion Criteria: All hospice care concepts should be included.
  
  Exclusion Criteria: Do not include concepts for palliative care or comfort measures.
  
  Subject constrained to the Hospice care ambulatory
  
  InterventionPerformed: Data elements that meet criteria using this datatype should document the completion of the intervention indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: startTime – The time the intervention begins stopTime – The time the intervention ends NOTE - timing refers to a single instance of an intervention. If a measure seeks to evaluate multiple interventions over a period of time, the measure developer should use CQL logic to represent the query request.
  
  DataType
  
  Cardinality
  
  HospiceCareAmbulatoryPerformed
  
  0..*
  
  AmoxapineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Amoxapine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AmoxapineOrder
  
  0..*
  
  AtropineDiphenoxylateOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Atropine / Diphenoxylate
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AtropineDiphenoxylateOrder
  
  0..*
  
  CyproheptadineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Cyproheptadine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  CyproheptadineOrder
  
  0..*
  
  DesipramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Desipramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DesipramineOrder
  
  0..*
  
  DicyclomineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dicyclomine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DicyclomineOrder
  
  0..*
  
  MeprobamateOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Meprobamate
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MeprobamateOrder
  
  0..*
  
  TrimipramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Trimipramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  TrimipramineOrder
  
  0..*
  
  AmitriptylineChlordiazepoxideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Amitriptyline / Chlordiazepoxide
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AmitriptylineChlordiazepoxideOrder
  
  0..*
  
  AcetaminophenDextromethorphanDoxylaminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Dextromethorphan / Doxylamine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenDextromethorphanDoxylaminePhenylephrineOrder
  
  0..*
  
  DiphenhydramineIbuprofenOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Diphenhydramine / Ibuprofen
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DiphenhydramineIbuprofenOrder
  
  0..*
  
  ChlorpheniramineHydrocodonePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Hydrocodone / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniramineHydrocodonePseudoephedrineOrder
  
  0..*
  
  DexchlorpheniramineDextromethorphanPseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dexchlorpheniramine / Dextromethorphan / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DexchlorpheniramineDextromethorphanPseudoephedrineOrder
  
  0..*
  
  ChlorpheniramineCodeineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Codeine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniramineCodeineOrder
  
  0..*
  
  AspirinCaffeineOrphenadrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Aspirin / Caffeine / Orphenadrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AspirinCaffeineOrphenadrineOrder
  
  0..*
  
  ChlorpropamideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpropamide
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpropamideOrder
  
  0..*
  
  CarbinoxamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Carbinoxamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  CarbinoxamineOrder
  
  0..*
  
  DiphenhydraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Diphenhydramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DiphenhydraminePhenylephrineOrder
  
  0..*
  
  ClemastineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Clemastine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ClemastineOrder
  
  0..*
  
  ChlorpheniraminePhenylephrinePyrilamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Phenylephrine / Pyrilamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniraminePhenylephrinePyrilamineOrder
  
  0..*
  
  AcetaminophenChlorpheniramineDextromethorphanPhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Chlorpheniramine / Dextromethorphan / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenChlorpheniramineDextromethorphanPhenylephrineOrder
  
  0..*
  
  DisopyramideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Disopyramide
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DisopyramideOrder
  
  0..*
  
  ChlorpheniramineDextromethorphanPhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Dextromethorphan / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniramineDextromethorphanPhenylephrineOrder
  
  0..*
  
  ChlorpheniraminePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniraminePseudoephedrineOrder
  
  0..*
  
  AcetaminophenChlorpheniraminePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Chlorpheniramine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenChlorpheniraminePseudoephedrineOrder
  
  0..*
  
  AcetaminophenButalbitalOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Butalbital
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenButalbitalOrder
  
  0..*
  
  AcetaminophenDiphenhydraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Diphenhydramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenDiphenhydraminePhenylephrineOrder
  
  0..*
  
  EstropipateOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Estropipate
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  EstropipateOrder
  
  0..*
  
  EsterifiedEstrogensMethyltestosteroneOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Esterified Estrogens / Methyltestosterone
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  EsterifiedEstrogensMethyltestosteroneOrder
  
  0..*
  
  AcetaminophenChlorpheniramineDextromethorphanPseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Chlorpheniramine / Dextromethorphan / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenChlorpheniramineDextromethorphanPseudoephedrineOrder
  
  0..*
  
  EstradiolNorethindroneOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Estradiol / Norethindrone
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  EstradiolNorethindroneOrder
  
  0..*
  
  ConjugatedEstrogensMedroxyprogesteroneOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Conjugated Estrogens / Medroxyprogesterone
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ConjugatedEstrogensMedroxyprogesteroneOrder
  
  0..*
  
  BrompheniramineDextromethorphanPhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine / Dextromethorphan / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniramineDextromethorphanPhenylephrineOrder
  
  0..*
  
  AcetaminophenButalbitalCaffeineCodeineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Butalbital / Caffeine / Codeine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenButalbitalCaffeineCodeineOrder
  
  0..*
  
  BrompheniraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniraminePhenylephrineOrder
  
  0..*
  
  AcetaminophenChlorpheniraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Chlorpheniramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenChlorpheniraminePhenylephrineOrder
  
  0..*
  
  ChlorpheniramineHydrocodoneOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Hydrocodone
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniramineHydrocodoneOrder
  
  0..*
  
  MethyldopaOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Methyldopa
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MethyldopaOrder
  
  0..*
  
  BrompheniraminePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniraminePseudoephedrineOrder
  
  0..*
  
  TrihexyphenidylOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Trihexyphenidyl
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  TrihexyphenidylOrder
  
  0..*
  
  ClomipramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Clomipramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ClomipramineOrder
  
  0..*
  
  ChlorpheniramineDextromethorphanPseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Dextromethorphan / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniramineDextromethorphanPseudoephedrineOrder
  
  0..*
  
  AcetaminophenDextromethorphanDoxylamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Dextromethorphan / Doxylamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenDextromethorphanDoxylamineOrder
  
  0..*
  
  BrompheniramineDextromethorphanPseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine / Dextromethorphan / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniramineDextromethorphanPseudoephedrineOrder
  
  0..*
  
  GuanfacineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Guanfacine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  GuanfacineOrder
  
  0..*
  
  MegestrolOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Megestrol
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MegestrolOrder
  
  0..*
  
  ChlorpheniraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniraminePhenylephrineOrder
  
  0..*
  
  PseudoephedrineTriprolidineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Pseudoephedrine / Triprolidine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  PseudoephedrineTriprolidineOrder
  
  0..*
  
  AspirinButalbitalCaffeineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Aspirin / Butalbital / Caffeine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AspirinButalbitalCaffeineOrder
  
  0..*
  
  PhenobarbitalOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Phenobarbital
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  PhenobarbitalOrder
  
  0..*
  
  DipyridamoleOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dipyridamole
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DipyridamoleOrder
  
  0..*
  
  AcetaminophenDiphenhydramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Diphenhydramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenDiphenhydramineOrder
  
  0..*
  
  MeperidineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Meperidine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MeperidineOrder
  
  0..*
  
  ChlorpheniramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniramineOrder
  
  0..*
  
  NifedipineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Nifedipine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  NifedipineOrder
  
  0..*
  
  DesiccatedThyroidOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Desiccated Thyroid
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DesiccatedThyroidOrder
  
  0..*
  
  AtropineHyoscyaminePhenobarbitalScopolamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Atropine / Hyoscyamine / Phenobarbital / Scopolamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AtropineHyoscyaminePhenobarbitalScopolamineOrder
  
  0..*
  
  ConjugatedEstrogensOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Conjugated Estrogens
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ConjugatedEstrogensOrder
  
  0..*
  
  MetaxaloneOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Metaxalone
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MetaxaloneOrder
  
  0..*
  
  ImipramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Imipramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ImipramineOrder
  
  0..*
  
  GlyburideMetforminOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Glyburide / Metformin
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  GlyburideMetforminOrder
  
  0..*
  
  BenztropineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Benztropine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BenztropineOrder
  
  0..*
  
  ChlorzoxazoneOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorzoxazone
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorzoxazoneOrder
  
  0..*
  
  AcetaminophenButalbitalCaffeineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Butalbital / Caffeine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenButalbitalCaffeineOrder
  
  0..*
  
  KetorolacTromethamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Ketorolac Tromethamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  KetorolacTromethamineOrder
  
  0..*
  
  EstradiolOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Estradiol
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  EstradiolOrder
  
  0..*
  
  IndomethacinOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Indomethacin
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  IndomethacinOrder
  
  0..*
  
  PromethazineHydrochlorideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Promethazine Hydrochloride
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  PromethazineHydrochlorideOrder
  
  0..*
  
  GlyburideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Glyburide
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  GlyburideOrder
  
  0..*
  
  CarisoprodolOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Carisoprodol
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  CarisoprodolOrder
  
  0..*
  
  MethocarbamolOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Methocarbamol
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MethocarbamolOrder
  
  0..*
  
  DiphenhydramineHydrochlorideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Diphenhydramine Hydrochloride
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DiphenhydramineHydrochlorideOrder
  
  0..*
  
  CyclobenzaprineHydrochlorideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Cyclobenzaprine Hydrochloride
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  CyclobenzaprineHydrochlorideOrder
  
  0..*
  
  AmitriptylineHydrochlorideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Amitriptyline Hydrochloride
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AmitriptylineHydrochlorideOrder
  
  0..*
  
  HydroxyzineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Hydroxyzine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HydroxyzineOrder
  
  0..*
  
  DexbrompheniramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dexbrompheniramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DexbrompheniramineOrder
  
  0..*
  
  DextromethorphanDiphenhydraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dextromethorphan / Diphenhydramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DextromethorphanDiphenhydraminePhenylephrineOrder
  
  0..*
  
  DienogestEstradiolMultiphasicOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dienogest / Estradiol Multiphasic
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DienogestEstradiolMultiphasicOrder
  
  0..*
  
  AcetaminophenDextromethorphanDiphenhydraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Dextromethorphan / Diphenhydramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenDextromethorphanDiphenhydraminePhenylephrineOrder
  
  0..*
  
  ButabarbitalOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Butabarbital
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ButabarbitalOrder
  
  0..*
  
  AcetaminophenDexbrompheniramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Dexbrompheniramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenDexbrompheniramineOrder
  
  0..*
  
  TriprolidineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Triprolidine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  TriprolidineOrder
  
  0..*
  
  BrompheniramineCodeinePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine / Codeine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniramineCodeinePhenylephrineOrder
  
  0..*
  
  DrospirenoneEstradiolOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Drospirenone / Estradiol
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DrospirenoneEstradiolOrder
  
  0..*
  
  ChlophedianolChlorpheniraminePhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlophedianol / Chlorpheniramine / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlophedianolChlorpheniraminePhenylephrineOrder
  
  0..*
  
  HydrochlorothiazideMethyldopaOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Hydrochlorothiazide / Methyldopa
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HydrochlorothiazideMethyldopaOrder
  
  0..*
  
  EsterifiedEstrogensOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Esterified Estrogens
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  EsterifiedEstrogensOrder
  
  0..*
  
  AcetaminophenChlorpheniramineDextromethorphanOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Acetaminophen / Chlorpheniramine / Dextromethorphan
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AcetaminophenChlorpheniramineDextromethorphanOrder
  
  0..*
  
  IsoxsuprineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Isoxsuprine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  IsoxsuprineOrder
  
  0..*
  
  DexchlorpheniraminePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dexchlorpheniramine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DexchlorpheniraminePseudoephedrineOrder
  
  0..*
  
  DexbrompheniramineDextromethorphanPhenylephrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dexbrompheniramine / Dextromethorphan / Phenylephrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DexbrompheniramineDextromethorphanPhenylephrineOrder
  
  0..*
  
  BrompheniramineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniramineOrder
  
  0..*
  
  AmitriptylinePerphenazineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Amitriptyline / Perphenazine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AmitriptylinePerphenazineOrder
  
  0..*
  
  DexbrompheniramineMaleatePseudoephedrineHydrochlorideOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dexbrompheniramine Maleate / Pseudoephedrine Hydrochloride
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DexbrompheniramineMaleatePseudoephedrineHydrochlorideOrder
  
  0..*
  
  DexbrompheniraminePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dexbrompheniramine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DexbrompheniraminePseudoephedrineOrder
  
  0..*
  
  ChlophedianolDexchlorpheniraminePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlophedianol / Dexchlorpheniramine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlophedianolDexchlorpheniraminePseudoephedrineOrder
  
  0..*
  
  BrompheniramineCodeinePseudoephedrineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Brompheniramine / Codeine / Pseudoephedrine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  BrompheniramineCodeinePseudoephedrineOrder
  
  0..*
  
  DextromethorphanDoxylamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dextromethorphan / Doxylamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DextromethorphanDoxylamineOrder
  
  0..*
  
  ChlorpheniraminePhenylephrinePhenyltoloxamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Chlorpheniramine / Phenylephrine / Phenyltoloxamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ChlorpheniraminePhenylephrinePhenyltoloxamineOrder
  
  0..*
  
  DimenhydrinateOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Dimenhydrinate
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  DimenhydrinateOrder
  
  0..*
  
  HyoscyamineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Hyoscyamine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HyoscyamineOrder
  
  0..*
  
  HyoscyamineMethenamineMbluePhenylSalicylOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Hyoscyamine / Methenamine / Mblue / Phenyl Salicyl
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HyoscyamineMethenamineMbluePhenylSalicylOrder
  
  0..*
  
  HyoscyamineMethenamineMbluePhenylSalicylSodiumBiphosphateOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Hyoscyamine / Methenamine / Mblue / Phenyl Salicyl / Sodium Biphosphate
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HyoscyamineMethenamineMbluePhenylSalicylSodiumBiphosphateOrder
  
  0..*
  
  HyoscyamineMethenamineMblueSodiumBiphosphateOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Hyoscyamine / Methenamine / Mblue / Sodium Biphosphate
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HyoscyamineMethenamineMblueSodiumBiphosphateOrder
  
  0..*
  
  MeclizineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Meclizine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  MeclizineOrder
  
  0..*
  
  NortriptylineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Nortriptyline
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  NortriptylineOrder
  
  0..*
  
  ParoxetineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Paroxetine
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ParoxetineOrder
  
  0..*
  
  ProtriptylineOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Protriptyline
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ProtriptylineOrder
  
  0..*
  
  HighRiskMedicationsForTheElderlyOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the High Risk Medications for the Elderly
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HighRiskMedicationsForTheElderlyOrder
  
  0..*
  
  ListOfSingleRxNormCodeConceptsForHighRiskDrugsForTheElderlyOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the List of Single RxNorm Code Concepts for High Risk Drugs for the Elderly
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  ListOfSingleRxNormCodeConceptsForHighRiskDrugsForTheElderlyOrder
  
  0..*
  
  HighRiskMedicationsWithDaysSupplyCriteriaOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the High-Risk Medications With Days Supply Criteria
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  HighRiskMedicationsWithDaysSupplyCriteriaOrder
  
  0..*
  
  NonbenzodiazepineHypnoticsOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Nonbenzodiazepine hypnotics
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  NonbenzodiazepineHypnoticsOrder
  
  0..*
  
  AntiInfectivesOtherOrder
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  Subject constrained to the Anti Infectives, other
  
  MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.
  
  DataType
  
  Cardinality
  
  AntiInfectivesOtherOrder
  
  0..*
  
  EthnicityPatientCharacteristicEthnicity
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  ResultValue constrained to codes in the Ethnicity valueset (2.16.840.1.114222.4.11.837)
  
  PatientCharacteristicEthnicity: Data elements that meet criteria using this datatype should document that the patient has one or more of the ethnicities indicated by the QDM category and its corresponding value set. Timing: Ethnicity does not have a specific timing. Measures using Patient Characteristic, Ethnicity should address the most recent entry in the clinical record.
  
  DataType
  
  Cardinality
  
  EthnicityPatientCharacteristicEthnicity
  
  0..*
  
  OncAdministrativeSexPatientCharacteristicGender
  
  Clinical Focus: Gender identity restricted to only Male and Female used in administrative situations requiring a restriction to these two categories.
  
  Data Element Scope: Gender
  
  Inclusion Criteria: Male and Female only.
  
  Exclusion Criteria: Any gender identity that is not male or female.
  
  ResultValue constrained to codes in the ONC Administrative Sex valueset (2.16.840.1.113762.1.4.1)
  
  PatientCharacteristicGender: Data elements that meet criteria using this datatype should document that the patient's sex matches the QDM category and its corresponding value set. Timing: Birth (administrative) sex does not have a specific timing.
  
  DataType
  
  Cardinality
  
  OncAdministrativeSexPatientCharacteristicGender
  
  0..*
  
  PayerPatientCharacteristicPayer
  
  Clinical Focus: Categories of types of health care payor entities as defined by the US Public Health Data Consortium SOP code system
  
  Data Element Scope: @code in CCDA r2.1 template Planned Coverage [act: identifier urn:oid:2.16.840.1.113883.10.20.22.4.129 (open)] DYNAMIC
  
  Inclusion Criteria: All codes in the code system
  
  Exclusion Criteria: none
  
  ResultValue constrained to codes in the Payer valueset (2.16.840.1.114222.4.11.3591)
  
  PatientCharacteristicPayer: Data elements that meet criteria using this datatype should document that the patient has one or more of the payers indicated by the QDM category and its corresponding value set. Timing: The Relevant Period addresses: startTime – The first day of insurance coverage with the referenced payer stopTime – The last day of insurance coverage with the referenced payer
  
  DataType
  
  Cardinality
  
  PayerPatientCharacteristicPayer
  
  0..*
  
  RacePatientCharacteristicRace
  
  Clinical Focus:
  
  Data Element Scope:
  
  Inclusion Criteria:
  
  Exclusion Criteria:
  
  ResultValue constrained to codes in the Race valueset (2.16.840.1.114222.4.11.836)
  
  PatientCharacteristicRace: Data elements that meet criteria using this datatype should document the patient’s race. Timing: Race does not have a specific timing. Measures using Patient Characteristic, Race should address the most recent entry in the clinical record.
  
  DataType
  
  Cardinality
  
  RacePatientCharacteristicRace
  
  0..*

CMS156v7 - Use of High-Risk Medications in the Elderly

Data Elements