ecqm.unions

Medication List Union

Description:

Based On: Union80

Used By:

• CMS156v7

QDM Attributes

AcetaminophenButalbitalOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Butalbital

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenButalbitalOrder

0..*

AcetaminophenButalbitalCaffeineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Butalbital / Caffeine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenButalbitalCaffeineOrder

0..*

AcetaminophenButalbitalCaffeineCodeineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Butalbital / Caffeine / Codeine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenButalbitalCaffeineCodeineOrder

0..*

AcetaminophenChlorpheniramineDextromethorphanOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Chlorpheniramine / Dextromethorphan

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenChlorpheniramineDextromethorphanOrder

0..*

AcetaminophenChlorpheniramineDextromethorphanPhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Chlorpheniramine / Dextromethorphan / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenChlorpheniramineDextromethorphanPhenylephrineOrder

0..*

AcetaminophenChlorpheniramineDextromethorphanPseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Chlorpheniramine / Dextromethorphan / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenChlorpheniramineDextromethorphanPseudoephedrineOrder

0..*

AcetaminophenChlorpheniraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Chlorpheniramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenChlorpheniraminePhenylephrineOrder

0..*

AcetaminophenChlorpheniraminePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Chlorpheniramine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenChlorpheniraminePseudoephedrineOrder

0..*

AcetaminophenDexbrompheniramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Dexbrompheniramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenDexbrompheniramineOrder

0..*

AcetaminophenDextromethorphanDiphenhydraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Dextromethorphan / Diphenhydramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenDextromethorphanDiphenhydraminePhenylephrineOrder

0..*

AcetaminophenDextromethorphanDoxylamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Dextromethorphan / Doxylamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenDextromethorphanDoxylamineOrder

0..*

AcetaminophenDextromethorphanDoxylaminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Dextromethorphan / Doxylamine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenDextromethorphanDoxylaminePhenylephrineOrder

0..*

AcetaminophenDiphenhydramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Diphenhydramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenDiphenhydramineOrder

0..*

AcetaminophenDiphenhydraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Acetaminophen / Diphenhydramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AcetaminophenDiphenhydraminePhenylephrineOrder

0..*

AmitriptylineChlordiazepoxideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Amitriptyline / Chlordiazepoxide

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AmitriptylineChlordiazepoxideOrder

0..*

AmitriptylinePerphenazineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Amitriptyline / Perphenazine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AmitriptylinePerphenazineOrder

0..*

AmitriptylineHydrochlorideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Amitriptyline Hydrochloride

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AmitriptylineHydrochlorideOrder

0..*

AmoxapineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Amoxapine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AmoxapineOrder

0..*

AspirinButalbitalCaffeineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Aspirin / Butalbital / Caffeine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AspirinButalbitalCaffeineOrder

0..*

AspirinCaffeineOrphenadrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Aspirin / Caffeine / Orphenadrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AspirinCaffeineOrphenadrineOrder

0..*

AtropineDiphenoxylateOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Atropine / Diphenoxylate

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AtropineDiphenoxylateOrder

0..*

AtropineHyoscyaminePhenobarbitalScopolamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Atropine / Hyoscyamine / Phenobarbital / Scopolamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

AtropineHyoscyaminePhenobarbitalScopolamineOrder

0..*

BenztropineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Benztropine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BenztropineOrder

0..*

BrompheniramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniramineOrder

0..*

BrompheniramineCodeinePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine / Codeine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniramineCodeinePhenylephrineOrder

0..*

BrompheniramineCodeinePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine / Codeine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniramineCodeinePseudoephedrineOrder

0..*

BrompheniramineDextromethorphanPhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine / Dextromethorphan / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniramineDextromethorphanPhenylephrineOrder

0..*

BrompheniramineDextromethorphanPseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine / Dextromethorphan / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniramineDextromethorphanPseudoephedrineOrder

0..*

BrompheniraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniraminePhenylephrineOrder

0..*

BrompheniraminePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Brompheniramine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

BrompheniraminePseudoephedrineOrder

0..*

ButabarbitalOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Butabarbital

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ButabarbitalOrder

0..*

CarbinoxamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Carbinoxamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

CarbinoxamineOrder

0..*

CarisoprodolOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Carisoprodol

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

CarisoprodolOrder

0..*

ChlophedianolChlorpheniraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlophedianol / Chlorpheniramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlophedianolChlorpheniraminePhenylephrineOrder

0..*

ChlophedianolDexchlorpheniraminePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlophedianol / Dexchlorpheniramine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlophedianolDexchlorpheniraminePseudoephedrineOrder

0..*

ChlorpheniramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniramineOrder

0..*

ChlorpheniramineCodeineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Codeine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniramineCodeineOrder

0..*

ChlorpheniramineDextromethorphanPhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Dextromethorphan / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniramineDextromethorphanPhenylephrineOrder

0..*

ChlorpheniramineDextromethorphanPseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Dextromethorphan / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniramineDextromethorphanPseudoephedrineOrder

0..*

ChlorpheniramineHydrocodoneOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Hydrocodone

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniramineHydrocodoneOrder

0..*

ChlorpheniramineHydrocodonePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Hydrocodone / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniramineHydrocodonePseudoephedrineOrder

0..*

ChlorpheniraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniraminePhenylephrineOrder

0..*

ChlorpheniraminePhenylephrinePhenyltoloxamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Phenylephrine / Phenyltoloxamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniraminePhenylephrinePhenyltoloxamineOrder

0..*

ChlorpheniraminePhenylephrinePyrilamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Phenylephrine / Pyrilamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniraminePhenylephrinePyrilamineOrder

0..*

ChlorpheniraminePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpheniramine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpheniraminePseudoephedrineOrder

0..*

ChlorpropamideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorpropamide

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorpropamideOrder

0..*

ChlorzoxazoneOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Chlorzoxazone

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ChlorzoxazoneOrder

0..*

ClemastineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Clemastine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ClemastineOrder

0..*

ClomipramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Clomipramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ClomipramineOrder

0..*

ConjugatedEstrogensOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Conjugated Estrogens

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ConjugatedEstrogensOrder

0..*

ConjugatedEstrogensMedroxyprogesteroneOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Conjugated Estrogens / Medroxyprogesterone

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ConjugatedEstrogensMedroxyprogesteroneOrder

0..*

CyclobenzaprineHydrochlorideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Cyclobenzaprine Hydrochloride

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

CyclobenzaprineHydrochlorideOrder

0..*

CyproheptadineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Cyproheptadine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

CyproheptadineOrder

0..*

DesiccatedThyroidOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Desiccated Thyroid

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DesiccatedThyroidOrder

0..*

DesipramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Desipramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DesipramineOrder

0..*

DexbrompheniramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dexbrompheniramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DexbrompheniramineOrder

0..*

DexbrompheniramineDextromethorphanPhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dexbrompheniramine / Dextromethorphan / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DexbrompheniramineDextromethorphanPhenylephrineOrder

0..*

DexbrompheniraminePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dexbrompheniramine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DexbrompheniraminePseudoephedrineOrder

0..*

DexbrompheniramineMaleatePseudoephedrineHydrochlorideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dexbrompheniramine Maleate / Pseudoephedrine Hydrochloride

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DexbrompheniramineMaleatePseudoephedrineHydrochlorideOrder

0..*

DexchlorpheniramineDextromethorphanPseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dexchlorpheniramine / Dextromethorphan / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DexchlorpheniramineDextromethorphanPseudoephedrineOrder

0..*

DexchlorpheniraminePseudoephedrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dexchlorpheniramine / Pseudoephedrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DexchlorpheniraminePseudoephedrineOrder

0..*

DextromethorphanDiphenhydraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dextromethorphan / Diphenhydramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DextromethorphanDiphenhydraminePhenylephrineOrder

0..*

DextromethorphanDoxylamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dextromethorphan / Doxylamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DextromethorphanDoxylamineOrder

0..*

DicyclomineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dicyclomine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DicyclomineOrder

0..*

DienogestEstradiolMultiphasicOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dienogest / Estradiol Multiphasic

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DienogestEstradiolMultiphasicOrder

0..*

DimenhydrinateOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dimenhydrinate

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DimenhydrinateOrder

0..*

DiphenhydramineIbuprofenOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Diphenhydramine / Ibuprofen

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DiphenhydramineIbuprofenOrder

0..*

DiphenhydraminePhenylephrineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Diphenhydramine / Phenylephrine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DiphenhydraminePhenylephrineOrder

0..*

DiphenhydramineHydrochlorideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Diphenhydramine Hydrochloride

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DiphenhydramineHydrochlorideOrder

0..*

DipyridamoleOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Dipyridamole

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DipyridamoleOrder

0..*

DisopyramideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Disopyramide

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DisopyramideOrder

0..*

DrospirenoneEstradiolOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Drospirenone / Estradiol

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

DrospirenoneEstradiolOrder

0..*

EsterifiedEstrogensOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Esterified Estrogens

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

EsterifiedEstrogensOrder

0..*

EsterifiedEstrogensMethyltestosteroneOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Esterified Estrogens / Methyltestosterone

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

EsterifiedEstrogensMethyltestosteroneOrder

0..*

EstradiolOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Estradiol

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

EstradiolOrder

0..*

EstradiolNorethindroneOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Estradiol / Norethindrone

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

EstradiolNorethindroneOrder

0..*

EstropipateOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Estropipate

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

EstropipateOrder

0..*

GlyburideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Glyburide

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

GlyburideOrder

0..*

GlyburideMetforminOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Glyburide / Metformin

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

GlyburideMetforminOrder

0..*

GuanfacineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Guanfacine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

GuanfacineOrder

0..*

HydrochlorothiazideMethyldopaOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Hydrochlorothiazide / Methyldopa

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

HydrochlorothiazideMethyldopaOrder

0..*

HydroxyzineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Hydroxyzine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

HydroxyzineOrder

0..*

HyoscyamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Hyoscyamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

HyoscyamineOrder

0..*

HyoscyamineMethenamineMbluePhenylSalicylOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Hyoscyamine / Methenamine / Mblue / Phenyl Salicyl

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

HyoscyamineMethenamineMbluePhenylSalicylOrder

0..*

HyoscyamineMethenamineMbluePhenylSalicylSodiumBiphosphateOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Hyoscyamine / Methenamine / Mblue / Phenyl Salicyl / Sodium Biphosphate

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

HyoscyamineMethenamineMbluePhenylSalicylSodiumBiphosphateOrder

0..*

HyoscyamineMethenamineMblueSodiumBiphosphateOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Hyoscyamine / Methenamine / Mblue / Sodium Biphosphate

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

HyoscyamineMethenamineMblueSodiumBiphosphateOrder

0..*

ImipramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Imipramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ImipramineOrder

0..*

IndomethacinOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Indomethacin

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

IndomethacinOrder

0..*

IsoxsuprineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Isoxsuprine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

IsoxsuprineOrder

0..*

KetorolacTromethamineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Ketorolac Tromethamine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

KetorolacTromethamineOrder

0..*

ListOfSingleRxNormCodeConceptsForHighRiskDrugsForTheElderlyOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the List of Single RxNorm Code Concepts for High Risk Drugs for the Elderly

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ListOfSingleRxNormCodeConceptsForHighRiskDrugsForTheElderlyOrder

0..*

MeclizineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Meclizine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MeclizineOrder

0..*

MegestrolOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Megestrol

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MegestrolOrder

0..*

MeperidineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Meperidine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MeperidineOrder

0..*

MeprobamateOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Meprobamate

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MeprobamateOrder

0..*

MetaxaloneOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Metaxalone

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MetaxaloneOrder

0..*

MethocarbamolOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Methocarbamol

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MethocarbamolOrder

0..*

MethyldopaOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Methyldopa

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

MethyldopaOrder

0..*

NifedipineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Nifedipine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

NifedipineOrder

0..*

NortriptylineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Nortriptyline

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

NortriptylineOrder

0..*

ParoxetineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Paroxetine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ParoxetineOrder

0..*

PhenobarbitalOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Phenobarbital

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

PhenobarbitalOrder

0..*

PromethazineHydrochlorideOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Promethazine Hydrochloride

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

PromethazineHydrochlorideOrder

0..*

ProtriptylineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Protriptyline

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

ProtriptylineOrder

0..*

PseudoephedrineTriprolidineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Pseudoephedrine / Triprolidine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

PseudoephedrineTriprolidineOrder

0..*

TrihexyphenidylOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Trihexyphenidyl

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

TrihexyphenidylOrder

0..*

TrimipramineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Trimipramine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

TrimipramineOrder

0..*

TriprolidineOrder

Clinical Focus:

Data Element Scope:

Inclusion Criteria:

Exclusion Criteria:

Subject constrained to the Triprolidine

MedicationOrder: Data elements that meet criteria using this datatype should document a request to a pharmacy to provide the medication indicated by the QDM category and its corresponding value set. Timing: The Author dateTime is the time the order is signed. Timing: The Relevant Period addresses: startTime = when the first administration of the medication is expected. The first administration may be expected at the time of the order or at a specified future date (i.e., the active time for the order); such information should be identified in the medication order. If the startTime is not specified in the order, the startTime defaults to the Author dateTime (the time the order is signed). stopTime = when the medication supply provided by the medication order is expected to be completed, including all fulfillments covered by the number of refills. Note that when calculating cumulative medication duration, the stopTime may be present directly in the medication order. If the stopTime is not available, the duration in days is the difference between the Relevant Period start and stop times multiplied by (1 + the number of refills). Refer to Special Cases in Appendix A (Section A.3) for scenarios to consider in calculating cumulative medication duration.

DataType

Cardinality

TriprolidineOrder

0..*